耐溶剂性和环境数据 - Autotex
Synopsis...
Autotex is based upon biaxially orientated polyester film and therefore has much enhanced solvent resistance, strength, durability and toughness compared to other commonly used membrane fascia and nameplate substrates such as polycarbonate and vinyl. Autotex withstands exposure of more than 24 hours duration under DIN 42 115 Part 2 to the following chemicals without visible change:
Autotex withstands DIN 42 115 Part 2 exposure of
Autotex is NOT resistant to the following chemicals:
1. RESISTANCE TO HOUSEHOLD CHEMICALS
Autotex withstands 24 hours exposure to the following reagents at 50oC without visible staining:
Very slight discoloration was noted under critical viewing conditions with the following materials:
2. ENVIRONMENTAL DATA
2.1 Minimum use temperature
Tactile embossed Autotex has been tested to 0.5 million switch operations at -40oC (-40oF) without loss of function.
2.2 Maximum use temperature
High humidity environments (10-95% RH) ≤60oC
Low humidity environments (<10% RH) 85oC
2.3 Outdoor Use
In common with all polyester based films Autotex is not suitable for use in conditions of long
term exposure to direct sunlight. (See Autotex XE)