| CAPILLEX Photostencil Films |
 The Capillex film range is so widely used that the name Capillex has almost become the generic term for capillary films. Autotype Capillex films are especially easy to use as the factory controlled coating provides the ultimate stencil profile. Wide processing latitude, consistency and durability produce high quality prints on every run.
Capillex films are classified by application as thin, medium, or thick films. The film applications are primarily high quality graphics such as four colour halftone printing and fine line applications. Inks used for these applications include solvent based, conventional UV and the new range of water based UV and graphics inks.
Colour coding is used throughout the Capillex range to denote the resistance of the product.
|
|
|
| Capillex CP | |
 |
| | |
| Features | Benefits | CP has been specifically formulated for ultra fine halftone and line printing. It gives a controlled stencil profile over a wide mesh range from 120/cm and finer. The low stencil profile and optimised Rz gives superb dot reproduction and minimises skipping effects often seen when printing fine halftones with UV ink. CP can be used with conventional UV and solvent based inks.
| Minimise ink usage through low ink build, reduces print 'skipping & stacking', low Rz and high resolution gives superb dot reproduction, high durability, total reliability.
| | Applications: CDs Ceramics Glass |
| Related products: Capillex 18 Capillex Laminating Fluid |
Technical information:
 Product Data |
|
|
|
|
|
|
|
|
|
|
|
|
| Capillex CX |  top |
|
The low stencil profile and optimised Rz gives superb print reproduction and
minimises the thick edges normally seen when trying to achieve good print
definition on coarse to medium mesh counts, especially when using high build
inks.
CX will give a thin, flat, but tough stencil on all coarse to medium mesh
counts. It is this thin, flat stencil that minimises the ink build at the
track edges to produce a cleaner more reliable print that can not only save ink
but also reduce wastage.
Technical Specifications
| |
| Features | Benefits | CX is a revolutionary new stencil system formulated for demanding industrial applications such as conductive or resistive ink printing and other critical deposit applications. Unlike conventional capillary films, CX will consistently give the same low but controlled stencil profile over a wide mesh range from 62-100/cm.
| Saves ink
Reduces wastage
Eliminates thick edges
Eeasy to print
| | Applications: Automotive Ceramics PCBs |
| Technical information:
Product Data |
|
|
|
|
|
|
| Capillex Laminating Fluid | top |
|
| | |
| Features | Benefits | Capillex Laminating Fluid is a thickened liquid for the application of capillary films in automated stencil application machines.
| Enables application in direct/indirect mode without increasing stencil profile, eliminates water marks, enhances adhesion and it is exceptionally easy to use
| | Related products: Capillex CP |
|
|
| Caplicators | top |
|
| | |
| Features | Benefits | Autotype have introduced an innovative way of applying medium size sheets to a mesh - the Autotype Caplicator.
| The Caplicator reduces the potential for dust entrapment as the dust is wiped clean from the film surface immediately prior to adhering.
|
|
|